nbm:GlobalConfig

Non Blocking Multicast Global Config.

Telemetry Sensor Path(s)

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
beaconAck string:Basic
NBM Process Init Alert ACK. Stops NBM from updating initBeacon. A sequence of characters
DEFAULT: 0
defaultDscp scalar:Uint32
Default DSCP value for flows. RANGE: [0, 4294967295]
DEFAULT: 0
defaultFlowPolicer nbm:nbmFlowPolicerEn
(scalar:Enum8)
Enable or Disable Policer for default Flow Policy SELECTION:
0 - DISABLED
1 - ENABLED
DEFAULT: ENABLED
defaultPimHostPolicy nbm:nbmPermit
(scalar:Enum8)
Default Allow or Deny policy for PIM groups. SELECTION:
0 - UNDEFINED
1 - DENIED
2 - ALLOWED
DEFAULT: ALLOWED
defaultReceiverHostPolicy nbm:nbmPermit
(scalar:Enum8)
Default Allow or Deny policy for Receiver hosts. SELECTION:
0 - UNDEFINED
1 - DENIED
2 - ALLOWED
DEFAULT: ALLOWED
defaultSenderHostPolicy nbm:nbmPermit
(scalar:Enum8)
Default Allow or Deny policy for Sender hosts. SELECTION:
0 - UNDEFINED
1 - DENIED
2 - ALLOWED
DEFAULT: ALLOWED
defaultflowBw scalar:Uint32
Flow Policy Default BW. RANGE: [0, 4294967295]
DEFAULT: 0
defaultflowBwUnit nbm:nbmBwUnitEn
(scalar:Enum8)
bandwidth units - Mbps, Kbps, or Gbps SELECTION:
0 - UNSPECIFIED
1 - KBPS
2 - MBPS
3 - GBPS
DEFAULT: KBPS
immediateBwRecovery nbm:nbmBwRecoveryEn
(scalar:Enum8)
Emable or Disable Immediate Flow BW Recovery SELECTION:
0 - DISABLED
1 - ENABLED
DEFAULT: ENABLED
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
operMode nbm:nbmOperationalMode
(scalar:Enum8)
NBM Operation mode. SELECTION:
0 - UNDEFINED
1 - PIM_ACTIVE
2 - PIM_PASSIVE
resBwRxOnly nbm:nbmDisEn
(scalar:Enum8)
Emable or Disable Bandwidth Reservation on Receiver Start Only SELECTION:
0 - DISABLED
1 - ENABLED
DEFAULT: DISABLED
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced
subscriptionId scalar:Uint32
DEPRECATED RANGE: [0, 4294967295]
DEFAULT: 0
unicastBwPercent scalar:UByte
Unicast Bandwidth Reservation.
RANGE: [0 , 100]
DEFAULT: 0